The Blustream IP50HD-RX is an industry leading 1080p HDMI video scaling receiver that uses H.265 compression technology to deliver HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
Blustream IP50HD-RX Contractor Series HD Video Receiver over 1Gb Network, Built-in Video Scaler, Bi-directional IR, RS-232 & USB/KVM, PoE and Analogue Audio Breakout
The IP50HD-TX is the new upgrade on Blustream's previous Video-over-IP product, and is compatible with the existing ACM200 control module and software. It can operate as matrix distribution when used with a network switch, or as a one-to-one HDMI extender without one. This product is also designed to be used with a compatible transmitter.
What Blustream say
The Contractor Series HD distribution platform allows the distribution of AV and control signals over a 1Gb network.
The IP50HD-RX is an industry-leading 1080p HDMI video scaling receiver that uses H.265 compression technology to deliver HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
The receiver can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available the Multicast HD solution is ideal for both commercial and residential installations.
Features
-
Advanced HD video, control and KVM over network infrastructure
-
Extends HDMI up to a distance of 100m over a single CAT cable
-
Supports unicast transmission over unmanaged networks
-
Supports multicast transmission for large managed networks
-
In-built video scaler to allow for inclusion of displays with differing resolution capabilities (1080p max)
-
Supports up to 1080p 60Hz video output
-
Supports PCM 2.0 channel audio only
-
Advanced signal management for independent routing of IR, RS-232, USB/KVM, and video/audio
-
PoE (Power over Ethernet) to power Blustream products from PoE switch
-
HDCP1.4 compliant with advanced EDID management
-
Analogue L/R audio breakout
-
Local 12V 1A power supply should Ethernet switch not support PoE (not included)
-
Features 2 operational modes:
-
Matrix distribution (requires 1Gb network switch)
-
One-to-one HDMI extender (no network switch required)
-
- Video Input Connectors: 1 x LAN RJ45 connector,
Video Output Connectors: 1 x HDMI Type A, 19-pin, female, locking
Audio Output Connectors: 1 x 3-pin Phoenix connector
Ethernet port: 1x LAN RJ45 connector (video extension)
RS-232 serial port: 1 x 3-pin Phoenix connector
USB/KVM Device Ports: 2 x USB-Type A
IR Input ports: 1 x 3.5mm stereo jack
IR Output ports: 1 x 3.5mm mono jack
Mounting kit included
Dimensions (W x D x H): 190mm x 95mm x 25mm
Dimensions Including Connections (W x D x H): 190mm x 100mm x 25mm, without feet
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: -4°F to 140°F (-20°C to 60°C)
- 1 x IP50HD-RX
- 1 x IR Receiver
- 1 x IR Emitter
- 1 x Mounting Kit
- 4 x Rubber Feet
