The IP50HD-TX is the new upgrade on Blustream's previous Video-over-IP product, and is compatible with the existing ACM200 control module and software. It can operate as matrix distribution when used with a network switch, or as a one-to-one HDMI extender without one. This product is also designed to be used with a compatible receiver.
Blustream IP50HD-TX Contractor Series HD Video Transmitter over 1Gb Network, HDMI Loop-Out, Bi-directional IR, RS-232 & USB/KVM, PoE, Analogue Audio Embedding and Analogue Audio Breakout
The IP50HD-TX is the new upgrade on Blustream's previous Video-over-IP product, and is compatible with the existing ACM200 control module and software. It can operate as matrix distribution when used with a network switch, or as a one-to-one HDMI extender without one. This product is also designed to be used with a compatible receiver.
What Blustream say
High Definition Video over IP Transmitter. The Contractor HD Multicast distribution platform allows the distribution of AV and control signals over a 1Gb network.
The IP50HD-TX is an industry-leading 1080p HDMI transmitter that uses H.265 compression technology to deliver HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
The transmitter includes an HDMI loop-out for cascading to multiple devices and can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available the Multicast HD solution is ideal for both commercial and residential installations.
Features
-
Advanced HD video, control and KVM over network infrastructure
-
Extends HDMI up to a distance of 100m over a single CAT cable
-
Supports unicast transmission over unmanaged networks
-
Supports multicast transmission for large managed networks
-
Supports up to 1080p @ 60Hz
-
Features 1 x HDMI loop-out for integrating local displays or cascading to multiple devices
-
Supports PCM 2.0 channel audio only
-
Advanced signal management for independent routing of IR, RS-232, USB/KVM, and video/audio
-
PoE (Power over Ethernet) to power product from a PoE switch
-
HDCP1.4 compliant with advanced EDID management
-
Analogue L/R audio embedding and audio breakout (2ch PCM only)
-
Local 12V 1A power supply should Ethernet switch not support PoE (supplied separately)
-
Features 2 operational modes:
-
Matrix distribution (requires 1Gb network switch)
-
One-to-one HDMI extender (no network switch required)
-
- Video input: 1 x HDMI Type A, 19-pin, female, locking
- Video output: 1 x LAN RJ45 connector, 1x HDMI Type A, 19-pin, female, locking
- Audio input: 1 x 3-pin Phoenix connector
- Audio output: 1 x 3-pin Phoenix connector
Ethernet port: 1 x LAN RJ45 connector
RS-232 serial port: 1 x 3-pin Phoenix connector
USB/KVM Host Port: 1 x USB-Type B
IR input: 1 x 3.5mm stereo jack
IR output: 1 x 3.5mm mono jack
Mounting kit included
Dimensions (W x D x H): 190mm x 95mm x 25mm
Dimensions Including Connections (W x D x H): 190mm x 100mm x 25mm, without feet
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: -4°F to 140°F (-20°C to 60°C)
- 1 x IP50HD-TX
- 1 x IR Receiver
- 1 x IR Emitter
- 1 x Mounting Kit
- 4 x Rubber Feet