GBP (£)
Code: CVA2500
2 Channel 500w Per Output Channel Digital DSP Amplifier CVA2500.
€2,364.99
Available to Order
QtyAdd to Cart
2 Channel 500w Per Output Channel Digital DSP Amplifier CVA2500
Cloud CVA2500 is a multi-channel power amplifier that is able to drive both low impedance loudspeakers at 4, 8 or 16 ohms; and high impedance 70/100V line loudspeaker systems. It has been designed for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Onboard, user-configurable digital signal processing allows for refined setup, whilst Ethernet, RS-232 and DC can be utilised for remote controlling.
Flexible Output
All models in the CV-Digital series offer a total power output capability of 1KW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. (100v only)
Ethernet / DSP
A full suite of user configurable DSP functionality is on-board the CVA-Digital series, which includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. Amplifiers can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters.
Auxiliary Outputs
Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels.
Analogue and Digital Control
The CVA-Digital series amplifiers are compatible with standard Cloud RL Series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems. A 3-way GPIO port can be configured for external master mute and fault condition signalisation
Cloud CVA2500 is a multi-channel power amplifier that is able to drive both low impedance loudspeakers at 4, 8 or 16 ohms; and high impedance 70/100V line loudspeaker systems. It has been designed for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Onboard, user-configurable digital signal processing allows for refined setup, whilst Ethernet, RS-232 and DC can be utilised for remote controlling.
Flexible Output
All models in the CV-Digital series offer a total power output capability of 1KW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. (100v only)
Ethernet / DSP
A full suite of user configurable DSP functionality is on-board the CVA-Digital series, which includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. Amplifiers can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters.
Auxiliary Outputs
Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels.
Analogue and Digital Control
The CVA-Digital series amplifiers are compatible with standard Cloud RL Series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems. A 3-way GPIO port can be configured for external master mute and fault condition signalisation
- Output Power: Total output power 1 kW, all channels
- Outputs: Low-impedance: 4 ohms or 8 ohms (selectable), High-impedance: 70 V or 100 V (rms)
- Frequency Response: 20 Hz to 20 kHz, +0 dB/-1 dB
- High Pass Filter: -3 dB @ 65 Hz via rear panel switches
- Distortion: 0.019%THD+N @1 kHz, 1 dB below rated output
- Noise: -94 dBr, 22 Hz to 22 kHz, relative to full power
- Crosstalk: Ch1 to Ch2: < -98 dB @1 kHz, -79 dB @10 kHz
- Other channel combinations: -107 dB @1 kHz, -98 dB @10 kHz (typical)
- Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors
- Sensitivity: 0 dBu (0.775 Vrms)
- Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced)
- Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors
- Power input: 85 to 265 V AC, 50 to 60 Hz
- Mains protection: Internal fuses: 2 x 250 V fuses, 20 x 5 mm, rating T4AH
- Amplifier Protection: Overcurrent, DC, Thermal monitoring, Switch-on delay
- Status Indicators: Power applied, Protection active, Signal peak, and Signal present
- Cooling: Variable speed fan
- Dimensions (W x H x D): 482.6 mm x 88 mm x 381.8 mm
- Weight: 6.75 kg (15.1 lb)
