Code: CVA8125
8 Channel 125w Per Output Channel Digital DSP Amplifier CVA8125.
€3,449.01
Available to Order
QtyAdd to Cart
8 Channel 125w Per Output Channel Digital DSP Amplifier CVA8125
Cloud Electronics, UK introduces its new range of energy efficient, class-leading amplifiers with the introduction of its new CVA-Series digital multi-channel digital amplifiers.
Flexible Output
All models in the CV-Digital series offer a total power output capability of 1KW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. (100v only)
Ethernet / DSP
A full suite of user configurable DSP functionality is on-board the CVA-Digital series, which includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. Amplifiers can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters.
Auxiliary Outputs
Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels.
Analogue and Digital Control
The CVA-Digital series amplifiers are compatible with standard Cloud RL Series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems. A 3-way GPIO port can be configured for external master mute and fault condition signalisation
Cloud Electronics, UK introduces its new range of energy efficient, class-leading amplifiers with the introduction of its new CVA-Series digital multi-channel digital amplifiers.
Flexible Output
All models in the CV-Digital series offer a total power output capability of 1KW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. (100v only)
Ethernet / DSP
A full suite of user configurable DSP functionality is on-board the CVA-Digital series, which includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. Amplifiers can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters.
Auxiliary Outputs
Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels.
Analogue and Digital Control
The CVA-Digital series amplifiers are compatible with standard Cloud RL Series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems. A 3-way GPIO port can be configured for external master mute and fault condition signalisation
Performance
- Output Power: Total output power 1 kW, all channels
- Output Voltage: 70 V or 100 V (rms)
- Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB
- High Pass Filter: -3 dB @ 65 Hz via rear panel switches, -3 dB @ 20 Hz to 20 kHz via DSP configuration
- Distortion: 0.03%THD @1 kHz, 1 dB below rated output
- Noise: -94 dB, 22 Hz to 22 kHz
- Crosstalk: < -90 dB @1 kHz, -82 dB @10 kHz adjacent channels, <-107 dB @1 kHz, -93 dB @10 kHz non-adjacent channels, All tested with 125 W load
- Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors
- Sensitivity: 0 dBu (0.775 Vrms)
- Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced)
- Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors
- Remote level control connectors: 3-pole 5 mm-pitch plug-in screw-terminal connectors, Compatible with Cloud RL Series remote control plates
- Power input: 85 to 264 V AC, 40 to 60 Hz
- Mains protection: Class 3T 250 V fuse, 20 x 5 mm, rating T8A
- Amplifier Protection: Overcurrent, DC, Thermal monitoring, Switch-on delay
- Status Indicators: Power applied, Protection active, Signal peak, and Signal present
- Cooling: Variable speed fan
- Dimensions (W x H x D): Net: 482.6 mm x 88 m x 381.8 mm (19 in x 3.46 in x 15.03 in), Shipping: 606 mm x 164 mm x 558 mm (23.9 in x 6.5 in x 22 in)
- Weight: Net: 8.05 kg (18.03 lb), Shipping: 10.05 kg (22.51 lb)
