GBP (£)
Code: DASPA2700
DAS PA-2700 2-channel amplifier, 1350 W @ 4 ohm, 2U, 230 V
€1,199.00
In Stock
QtyAdd to Cart
The PA series amplifiers are designed and built to provide an affordable quality powering solution. The wide range of models makes the series ideal for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit operational mode selection (bridge stereo or parallel) and input sensitivity selection.
- 1350 W x 1350 W at 4 "
- Stereo/Bridged/Parallel Operation
- SpeakON output connectors
- Clip protection and Signal present LED indicators
| Audio Signal Input Connector | 2 x Female XLR | Total Harmonic Distortion | <0.5% 20 Hz - 20 kHz |
|---|---|---|---|
| Cooling | Internal heat sinks with forced air: Fan cooled | Audio Signal Loop Thru Connector | 2 x Male XLR |
| Signal to Noise Ratio | > 100 dB @ 20 Hz - 20 kZ | Amplifier Protections | Protection against short circuits no-load on/off muting RF interference. |
| Frequency Response | 20 Hz - 20 kHz +0 - 1 dB | LED Indicators | Power Protection Signal Clip |
| Bridged Mono Mode | Power 8 Ohms - 2700 W | Audio Output Connector (2) | 2 x Male XLR |
| Stereo Mode (both channels driven) | Power 8 Ohms - 100 W, Power 4 Ohms - 1350 W | Speaker Output Connector | 2 x speakON |
| Net Weight kg | 19.5 | Audio Input Connector (2) | 2 x Female XLR |
| Dimensions H x W x D (mm) | 88 x 482 x 294 mm | Voltage gain | 36 dB |
| AC Power Requirements | 230 VAC 50/60 Hz | Damping Factor | > 200 @ 10 Hz - 400 Hz |
| Current Draw 230 V | 9.2 A |
