GBP (£)
Code: DASPA500
DAS PA-500 2-channel amplifier, 250 W @ 4 ohm, 2U, 230 V
€479.00
Low Stock
QtyAdd to Cart
The PA series amplifiers are designed and built to provide an affordable quality powering solution. The wide range of models makes the series ideal for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit operational mode selection (bridge stereo or parallel) and input sensitivity selection.
- 250 W x 250 W at 4 "
- Stereo/Bridged/Parallel Operation
- SpeakON output connectors
- Clip protection and Signal present LED indicators
| Total Harmonic Distortion | <0.5% 20 Hz - 20 kHz | Current Draw 230 V | 2.8 A |
|---|---|---|---|
| Cooling | Internal heat sinks with forced air: Fan cooled | Amplifier Protections | Protection against short circuits no-load on/off muting RF interference. |
| LED Indicators | Power Protection Signal Clip | Audio Output Connector (2) | 2 x Male XLR |
| Speaker Output Connector | 2 x speakON | Audio Input Connector (2) | 2 x Female XLR |
| Voltage gain | 27 dB | Damping Factor | > 200 @ 10 Hz - 400 Hz |
| Audio Signal Loop Thru Connector | 2 x Male XLR | Signal to Noise Ratio | > 100 dB @ 20 Hz - 20 kZ |
| Frequency Response | 20 Hz - 20 kHz +0 - 1 dB | Bridged Mono Mode | Power 8 Ohms - 500 W |
| Stereo Mode (both channels driven) | Power 8 Ohms - 150 W, Power 4 Ohms - 250 W | Net Weight kg | 10.1 |
| Dimensions H x W x D (mm) | 88 x 482 x 227 mm | AC Power Requirements | 230 VAC 50/60 Hz |
| Audio Signal Input Connector | 2 x Female XLR |
