GBP (£)
Code: DPA2028-B-SE2
The DPA 2028-B-SE2 Supercardioid Vocal Condenser Microphone Capsule, along with the SE2 Adapter, is meticulously engineered to address the distinct chall...
€559.00
Low Stock
QtyAdd to Cart
The DPA 2028-B-SE2 Supercardioid Vocal Condenser Microphone Capsule, along with the SE2 Adapter, is meticulously engineered to address the distinct challenges encountered in live stage performances. When coupled with a Sennheiser 2000, 6000, 9000, or evolution series transmitter and receiver (available separately), it excels in capturing and delivering transparent, natural audio for live stage, theater, and broadcast applications.
Featuring a supercardioid condenser capsule, the 2028 ensures a flat off-axis response. This characteristic provides the microphone with an exceptionally high gain-before-feedback, facilitating the effective management of bleed from nearby instruments for sound engineers. The capsule is securely fixed in place on the newly designed shock mount and cannot be dismounted. Additionally, the pop filter is specifically tailored for use with the 2028 microphone.Features
- Form Factor: Handheld Capsule
- Sound Field: Mono
- Capsule: Condenser
- Polar Pattern: Supercardioid
- Frequency Range: 20 Hz to 20 kHz
- Maximum SPL: 160 dB SPL Peak
- Impedance: 150 Ohms
- Sensitivity: 5 mV/Pa at 1 kHz
- Dynamic Range: 117 dB A-Weighted
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Effective frequency response: 20 Hz - 20 kHz
- Frequency range, ±2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
- Sensitivity, nominal, ±3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
- THD: < 1% up to 139 dB SPL peak
- Dynamic range: Typ. 117 dB
- Max. SPL, THD 10%: 160 dB SPL peak
- Rated output impedance: 150 Ω
- Minimum load impedance: 1 kΩ
- Cable drive capability: 100 m (328 ft)
- Output balance principle: Impedance balancing with Active Drive
- Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
- Power supply (for full performance): 48 V Phantom power (±4 V)
- Current consumption: Max 2.5 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Weight: 286 g (10.1 oz)
- Diameter: 48 mm (1.9 in)
- Capsule diameter: 19 mm (0.75 in)
- Microphone length: 188 mm (7.4 in)
- Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
- Polarity: +V at pin 2 for positive sound pressure
