GBP (£)
Code: DPA4018VL-B-SL1
DPA d:facto™ 4018VL Linear Supercardioid Mic, SL1 Adapter (Shure/Sony/Lectrosonics/Line6), Black
€984.00
Available to Order
QtyAdd to Cart
The d:facto™ series brings true studio sound to the live stage and broadcasting studio. These mics are available in an extremely linear version as well as in a version with a high-end boost. The modular nature of the d:facto™ series allows you to switch the capsule as well as the adapter, making it the most flexible vocal microphone available on the market.
CAPSULE
- Linear with high-end boost (4018V)
WIRED OR WIRELESS
- Wired
COLOR
- Black
ACCESSORIES
- Wired handle
- Clip
- Grid
d:facto™ 4018VL Linear Supercardioid Mic, SL1 Adapter (Shure/Sony/Lectrosonics/Line6), Black
4018V-B-B01d:facto™ 4018V Softboost Supercardioid Mic, Wired DPA Handle, Black
- Extraordinarily natural sound
- Perfectly uniform supercardioid directionality
- High separation
- Extreme SPL handling
- Low handling noise
- Sleek design
- Flexible adapter system fits most professional wireless systems
| Color | Matte black | Polarity | +V at pin 2 for positive sound pressure |
|---|---|---|---|
| Total harmonic distortion (THD) | < 1% up to 139 dB SPL peak | Microphone length | 205 mm (8.1 in) |
| Weight | 309 g (10.9 oz) | Temperature Range | -40°C to 45°C (-40°F to 113°F) |
| S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Typ. 75 dB(A) | Capsule diameter | 19 mm (0.75 in) |
| Microphone Diameter | 52 mm (2.05 in) | Equivalent noise level, A-weighted | Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A)) |
| Power supply (for full performance) | 48 V Phantom power (± 4 V) | Current Consumption | Max. 2 mA |
| Sensitivity, nominal, ±2 dB at 1 kHz | 5 mV/Pa; -46 dB re. 1 V/Pa | Common mode rejection ratio (CMRR) | > 50 dB at 1 kHz |
| Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase | Frequency range, ±2 dB, at 12 cm (4.7 in) | 100 Hz - 16 kHz with 3 dB soft boost at 12 kHz |
| Output balance principle | Impedance balancing with Active Drive | Frequency Range | 20 Hz - 20 kHz, permanent third order high pass filter at 80 Hz |
| Cartridge type | Pre-polarized condenser | Cable drive capability | 100 m (328 ft) |
| Output Impedance | 100 Ω | Principle of operation | Pressure gradient |
| Minimum load impedance | 1 kΩ | Relative humidity (RH) | Up to 90% |
| Dynamic Range | Typ. 120 dB | Directional pattern | Supercardioid |
| Max. SPL, peak before clipping | 160 dB | Maximum output voltage, RMS | 8 V |
