GBP (£)
Code: DASIA1002
DAS IA-1002 2-channel 500 W @ 4 ohm or 1-channel 1000 W @ 100 V amplifier, 2U DIN
€1,208.00
Available to Order
QtyAdd to Cart
The IA Series IA-1002 offers 500 W per channel at four ohms. The amplifiers offer operation in bridge mode or powering 70/100 V lines. The rear panel incorporates switches for activating a 80 Hz high-pass filter stereo or line/bridge modes and selection between 70 or 100 V lines. Input and output connections are made by way of Phoenix connectors. The IA-1002 is housed in a rugged 2-unit high steel chassis.
- 500 W per channel @ 4 ohms
- Class D topology
- Bridged/70 V/100 V operation
| Audio Input Connector (2) | Teminal Block | Power 70 V | 1 x 1000 W |
|---|---|---|---|
| Power 100 V | 1 x 1000 W | Output Circuitry | Class D |
| Current Draw 230 V | 1.75 A | Cooling | Side-Right-to-Left |
| Amplifier Protections | Short Circuit DC Output Temperature Over/Under Voltage | LED Indicators | Power Protection Signal Clip |
| Speaker Output Connector | Terminal Block | Audio Signal Loop Thru Connector | Terminal Block |
| Voltage gain | 32 dB | Frequency Response | 20 Hz - 30 kHz +0 - 0.5 dB |
| Bridged Mono Mode | Power 8 Ohms - 1 x 1000 W | Stereo Mode (both channels driven) | Power 8 Ohms - 2 x 250 W, Power 4 Ohms - 2 x 500 W |
| Net Weight kg | 3.5 | Dimensions H x W x D (mm) | 88.4 x 483 x 208 mm |
| AC Power Requirements | 115 VAC 50/60 Hz230 VAC 50/60 Hz | Audio Signal Input Connector | Terminal Block |
